Bio-SynXtra™ E.P. Gear Oils (ISO 46, 68, 100, 150, 220, 320, 460, 680, 1000)

Bio-SynXtra™ EP Gear Oils are designed to meet and exceeds the U.S. Steel 224, AGMA 9005/250.04, DIN 51517, Part 3, David Brown DB S1.53.101, and Cincinnati Machine E.P. performance requirements. Bio-SynXtra EP Gear Oils are recommended for lubricating spur, helical, bevel, and worm gear configurations which are subject to heavy loading or shock loading and are designed for heavy-duty applications. Bio-SynXtra gear oils provide enhanced thermal and oxidation stability for extended life.

Technical Data Sheet

Bio-E.P. Gear™ Oils (ISO 46, 68, 100, 220, 320, 460)

Bio-E.P. Gear™ Oils are designed to meet and exceeds the U.S. Steel 224, AGMA 9005/250.04, DIN 51517, Part 3, David Brown DB S1.53.101, and Cincinnati Machine E.P. performance requirements. Bio-E.P. Gear oils are the perfect economical choice where leakage or contaminations are more prominent and equipment requires more frequent oil change intervals.

Technical Data Sheet

Bio-SynXtra™ Hydra-Gear Fluids

Bio-SynXtra™ Hydra-Gear Fluids are specially designed, biobased synthetic formulas that replace conventional mineral oil based lubricants for bearing, hydraulic, and gear applications not requiring high levels of extreme pressure (EP).

Technical Data Sheet

Bio-SynXtra™ 75W90 GL-5 LS Gear Oil

Bio-SynXtra™ 75W90 GL-5 LS is designed to meet/exceed the SAE J306 and SAE J2360 requirements for manual transmissions, differentials (including limited slip (LS) units), and transfer cases.

Technical Data Sheet

Bio-SynXtra™ 80W90 Gear Oil GL-5

Bio-E.P.™ 80W90 Gear Oil is designed to meet the GL-4 requirements of spiral bevel transmission and moderate service hypoid gears.

Technical Data Sheet

Bio-E.P. Press™ Oils (ISO 46, 68, 100, 150, 220)

Bio-E.P. Press™ Oils are designed to meet and exceeds the demanding gear and bearing requirements in printing press systems.

Technical Data Sheet

Bio-Spindle™ Oils (ISO 22)

Bio-Spindle™ Oil is an ultimate biodegradable vegetable based formula that replaces many mineral oil based spindle oils.

Technical Data Sheet

Bio-Air Compressor™ Fluid (AC-30)

Bio-Air Compressor™ Fluid is an ultimately biodegradable biobased/synthetic formula that replaces hydrocarbon oil based compressor fluids.

Technical Data Sheet

Bio-Air Tool™ Lubricants (ISO 22, 32)

Bio-Air Tool™ Lubricants are specially formulated, ultimately biodegradable air tool lubricants designed to replace petroleum based air tool oils.

Technical Data Sheet

Bio-Drip™ Oils (SAE 10W20, SAE 10W30)

Bio-Drip™ Oils are fully formulated ultimately biodegradable vegetable based high performance turbine oils.  Bio-Drip™ Oils are recommended for use in drip lubrication systems for water well line shaft bearings, irrigation systems, etc.

Technical Data Sheet

Bio-Vacuum Pump™ Oil (SAE 10W30)

Bio-Vacuum Pump™ Oil is an ultimately biodegradable vegetable oil formula that is recommended in the dairy industry for automatic milking machines and most other vacuum pump applications.  Can also be used as an AW hydraulic fluid and it contains rust, corrosion, oxidation and foam inhibitors.

Technical Data Sheet

Bio-Slide Way™ Lubricant (ISO 32, 68, 220)

Bio-Slide Way™ Lubricants are specially formulated biodegradable, biobased products developed for the lubrication of machine tools and slides.  They eliminate stick-slip or table chatter by reducing friction between mating surfaces.  Where ways are heavily loaded they provide super high film strength and excellent EP protection.

Technical Data Sheet

Bio-Gearhead™ Oils

A Gearhead is the laymen’s language for the right angle gear drive commonly used to reduce the speed of an irrigation engine to drive water well turbine pumps. Baldor-Dodge Gear Motors and Boston Speed Reducers are examples of OEM manufacturers that produce gear drive units.

Technical Data Sheet